KTK-7/14 oxygen compressor (equivalent) 6,000 nm³/hour up to 4 MPa

RusGazCryo offers compressor equipment, including oxygen centrifugal compressors. The 3TYS72+2TYS58 model has a capacity of 6000 nm3/hour and operates at pressures up to 4 MPa. Its scope of application is oxygen compression. The device is in demand in metallurgy, chemical production, and other areas where oxygen operations are required.

Features of the device

RusGazCryo LLC supplies compressor units designed to work with oxygen using Hitachi technologies. The manufacturer has been developing and producing centrifugal oxygen compressors for more than 70 years.

The safety of the installation is achieved through the following measures:

1. The inside walls of the equipment are copper-plated.
2. The installation provides for safe operation monitoring and has protection against pumping.
3. The compression system is controlled by temperature.
4. A multi-port labyrinth seal minimizes the risk of gas leakage.
5. The gas seals in the compressor are multi-channel differential seals, which further prevent oxygen leakage and protect against environmental contamination.

The 3TYS72+2TYS58 model can be used instead of the KTK-7/14 centrifugal compressor from Kazankompressormash for metallurgy and chemical industries, as it is its equivalent.

MAPRO capabilities

All equipment offered by RusGazKrio can be combined with the MAPRO system, a digital monitoring system for controlling and forecasting the operation of rotary equipment.

MAPRO has the following functionality:

• monitoring equipment parameters in the flow;
• analysis of operational information that is not monitored by a conventional automation system;
• evaluation of a data array according to specific characteristics;
• preparation of data for transfer to the ERP and MES control module.

The MAPRO system was created by RusGazCryo LLC to digitize rotary machines at large manufacturing enterprises.