Projects
Compressor Equipment
Cryogenic Equipment
Spherical Tanks Cryogenic Pumps Oxygen Fittings Made of Stainless Steels
Block-Modular Equipment
Automation
Services
About Company
Contacts

Regeneration unit

The unit is designed for the regeneration of saturated glycol

Installed: at the Anastasievsko-Troitskoye field, Gazelan gas drying units.

Description

Gas extracted from the earth contains a significant amount of moisture. During transportation, the resulting condensate reacts with gas components to form hydrates, which can settle on pipe walls and cause blockages. Glycol or methanol is used to dry gaseous substances. In the technological process, dryers are used repeatedly; for this purpose, they are regenerated and reused in production.

Methanol regeneration unit

The gas industry needs methanol as an inhibitor of hydrate formation. Methyl alcohol recovery plants are characterized by a 95% yield of pure substance. The technological process is as follows:

  • preheating of the VMR;
  • removal of condensate and low-boiling hydrocarbons in the separator;
  • removal of the released gas from the upper part of the apparatus;
  • output of VMR to the heat exchanger for heating by water flow;
  • methanol regeneration;
  • cooling and removal from the unit.

With thermal regeneration of methanol, efficiency increases to 87%.

Glycol recovery

  • Medium flow to the fine filter;
  • cooling of vapors in the dephlegmator, organization of irrigation flow;
  • heating in a heat exchanger by means of a flowing hot stream, followed by feeding into an evaporation column;
  • rectification of glycol-water mixtures;
  • concentration of the desiccant in the stripping column;
  • Pumping regenerated glycol through an air cooling device into a storage vessel.

The use of a regeneration control unit improves the efficiency, safety, and reliability of the equipment.

About the Company

RusGazCryo LLC, the official dealer of the Chinese company Hangzhou Oxygen Plant Group, offers to order the design and manufacture of a regeneration unit. We will arrange delivery, carry out commissioning and start-up work, and provide maintenance services.

tt
Name of indicators, unit of measuremenValue
Производительность, кг/чот 750 до 17995
Calculated pressure, MPa, no more than 4.0
Temperature, °C
casing from 50 to 250
operating environmen from 10 to 250
Internal diameter of the device housing, mm from 400 to 2400
Environment glycol, desorption gas, water vapor, flue gases

Преимущества сотрудничества с нами

Выступаем ЕРСМ подрядчиком по комплексным проектам
Оказываем комплексные услуги по проектированию, производству, доставке и монтажу оборудования для обеспечивающих цехов на территории РФ и СНГ
Собственное производство, оснащенное современным оборудованием.Быстрое размещение заказов на оборудование на партнерских производственных площадках
Организуем визиты представителей заказчика на производственные площадки, в том числе на завод-изготовитель компрессорного оборудования в Китае
Возможность замена выработавшего ресурс компрессорного оборудования на аналоги без существенных изменений границ площадки
Внедряем систему мониторинга, анализа и прогнозирования работы поставляемого оборудования - MAПRO
Осуществили перевооружение кислородно - компрессорного цеха у одного из мировых лидеров металлургической отрасли - ПАО «НЛМК»
Принимаем участие в государственных и муниципальных
тендерах в соответствии с 44-ФЗ и 223-ФЗ, а также в
тендерных закупках коммерческих организаций
Пригласить в тендер

Реализованные проекты

Посмотреть все проекты→